Popis produktu
The real time clock module provides seconds, minutes, hours, days, date, months, and year information. The end of the month date is automatically adjusted for months with less than 31 days, including correction for leap years. This real time clock module communicates with a microprocessor via a simply serial interface. The clock module operates in either 24-hour or 12-hour format with AM / PM indicator.
Description:
-
31 x 8 RAM for scratchpad data storage
-
Serial I/O interface for minimum pin count
-
Wide Working Voltage: 2.0 ~ 5.5V
-
Single-byte and multi-byte transmission for clock or RAM data read / write
-
TTL-compatible (Vcc=5V)
-
Working Temperature: 0 to +70 Deg C
-
32.768KHz crystal oscillator
-
Equipped with a 260mAh CR2032 button battery, not rechargeable
-
Overall Size: Approx. 44 x 23 x 11mm
Wiring:
-
Vcc - +5V / 3.3V
-
GND - GND
-
CLK - P01
-
DAT - P02
-
RST - P00
Note:
The 1.VCC to GND Do not reversed, it would burn the chip
2.51 MCU P0 port pull-up resistor, if your microcontroller does not have pull-up resistor, data lines connected to other ports